Find Transmitters By...

Customer Support: (888) 315-8161 M-F 8-5 PM EST

Ramsey FM100BEX Hi Power FM Stereo Transmitter Kit

List Price: $75.99
Sale Price: $324.95

  • This is a kit, you must be skilled with electronics to assemble this
  • 1W Power Output
  • Built-in mixer – 2 line inputs and one microphone input, line level monitor output!
  • Frequency range 88.0 to 108.0, 100 kHz steps
  • Clean, filtered RF output suitable for RF amplification

View on Amazon

The true professional workhorse of our FM Stereo transmitter line, the FM100B has become the transmitter of choice for both amateurs and professionals around the world. From the serious hobbyist to churches, drive-in theaters, colleges and schools, it continues to be the leader. Not just a transmitter, the FM100B is a fully functional radio station and provides everything but the audio input and antenna system.

This professional synthesized transmitter is adjustable directly from the front panel with a large LED digital readout of the operating frequency. Just enter the setup mode and set your frequency. Once selected and locked, you are assured of a rock stable carrier with zero drift. The power output is continuously adjustable throughout the power range of the model selected. Audio quality is equally impressive. A precision active low-pass brick wall audio filter and peak level limiters give your signal maximum “punch” while preventing overmodulation. Two sets of stereo line level inputs are provided with front panel level control for both. Dual front panel LED bar-graph meters provide left and right channel audio level metering. In addition to the line level inputs, there is a separate microphone input with a built-in mic mixer to control the level. Not enough? How about unattended microphone ducking! When enabled, the presence of mic audio automatically reduces and overrides the line level input! Just like the professional units at a fraction of the cost.

Note: The FM100B and FM100BEX are do-it-yourself learning kits that you assemble. The end user is responsible for complying with all FCC rules & regulations within the US or any regulations of their respective governing body. The FM100BWT is solely for export use and can only be shipped to locations outside the continental US or valid APO/FPO addresses or valid customs brokers for documented end delivery outside the continental US. The end user is responsible for complying with all rules and regulations of their respective governing body. Orders for the FM100BWT are processed manually and verified to be export compliant prior to order acceptance. There are no exceptions.

Warranty

This information was taken from the Ramsey Electronics Website

1. DEFECTIVE PARTS:  It’s always easy to blame a part for a problem in your kit, Before you conclude that a part may be bad, thoroughly check your work. Today’s semiconductors and passive components have reached incredibly high reliability levels, and it’s sad to say that our human construction skills have not! But on rare occasions a sour component can slip through. All our kit parts carry the Ramsey Electronics® Warranty that they are free from defects for a full ninety (90) days from the date of purchase. Defective parts will be replaced promptly at our expense. If you suspect any part to be defective, please mail it to our factory for testing and replacement. Please send only the defective part(s), not the entire kit. The part(s) MUST be returned to us in suitable condition for testing. Please be aware that testing can usually determine if the part was truly defective or damaged by assembly or usage. Don’t be afraid of telling us that you ‘blew-it’, we’re all human and in most cases, replacement parts are very reasonably priced.

2. MISSING PARTS: Before assuming a part value is incorrect, check the parts listing carefully to see if it is a critical value such as a specific coil or IC, or whether a RANGE of values is suitable (such as “100 to 500 uF”). Often times, common sense will solve a mysterious missing part problem. If you’re missing five 10K ohm resistors and received five extra 1K resistors, you can pretty much be assured that the ‘1K ohm’ resistors are actually the ‘missing’ 10 K parts (“Hum-m-m, I guess the ‘red’ band really does look orange!”) Ramsey Electronics® project kits are packed with pride in the USA. If you believe we packed an incorrect part or omitted a part clearly indicated in your assembly manual as supplied with the basic kit by Ramsey, please write or call us with information on the part you need and proof of kit purchase.

3. FACTORY REPAIR OF ASSEMBLED KITS:

To qualify for Ramsey Electronics® factory repair, kits MUST:

  1. NOT be assembled with acid core solder or flux.
  2. NOT be modified in any manner.
  3. BE returned in fully-assembled form, not partially assembled.
  4. BE accompanied by the proper repair fee. No repair will be undertaken until we have received the MINIMUM repair fee (1/2 hour labor) of $25.00, or authorization to charge it to your credit card account.
  5. INCLUDE a description of the problem and legible return address. DO NOT send a separate letter; include all correspondence with the unit. Please do not include your own hardware such as non-Ramsey cabinets, knobs, cables, external battery packs and the like. Ramsey Electronics®, reserves the right to refuse repair on ANY item in which we find excessive problems or damage due to construction methods. To assist customers in such situations, Ramsey Electronics®, reserves the right to solve their needs on a case-by-case basis.

The repair is $36.00 per hour, regardless of the cost of the kit. Please understand that our technicians are not volunteers and that set-up, testing, diagnosis, repair and repacking and paperwork can take nearly an hour of paid employee time on even a simple kit. Of course, if we find that a part was defective in manufacture, there will be no charge to repair your kit (But please realize that our technicians know the difference between a defective part and parts burned out or damaged through improper use or assembly.)

Refunds

This information was taken from the Ramsey Electronics Website

You are given ten (10) days to examine our products. If you are not satisfied, you may return your unassembled kit with all the parts and instructions and proof of purchase to the factory for a full refund. The return package should be packed securely. Insurance is recommended. Please do not cause needless delays, read all information carefully.

Manual

Special Offers